Xiamen Paramita Lighting Co Ltd
Add: Room D-1, 2# building 6/F, No 1888 West Hongxiang Road, Xiang An District, Xiamen, Fujian, China
Contact us: Jarrell Li
Tel: 86-592-3757681
Fax: 86-592-3757698
Mobile: 86-18750298566
E-mail: SALES01@HONTAY.COM
1. Try not to turn on the light when the voltage is low. Because of the low voltage when the lamp lights up when the poles in the light when the production of tungsten, suitable plastic think this will let the inside of the lamp is prone to many point-like pollutants, so that the lamp is damaged, so it is recommended to open the lamp as far as possible in the case of high voltage.
2. In the use of fluorescent lamps, switch the frequency of the lamp not too frequent, if the frequency is too frequent, will make the fluorescent lamp both ends of the tube will prematurely become black, the output power of the lamp will be affected, and it is worth noting that after turning off the lights need to restart, generally wait 5-15 minutes.
3. In the environment also need to pay attention to the general maintenance of the tube around the ventilation effect, not only can reduce the dust on the tube, but also to the temperature of the lamp to reduce the effect, in order to extend the service life of the Lamp
4. In general, the fluorescent lamp is a lot of circuits need to assist devices, and transformers, capacitors and so must be appropriate to use, in order to ensure that the lamp after the start to reach the appropriate power.
Previous: LED Candle Lamp Detailed overview